Pris: DKK 1.499,00 Tilbud: DKK 999,00 På Lager
Nr. 1100 Vægt: 300 gram
Software:
Klik på billedet, for at se et større billede
ElmScannner for USB med support for E-OBD CANBUS
Beskrivelse: Original produkt i super kvalitet med nyeste version Elm327 chip
Beskrivelse: Elm scan har sin oprindelse i USA, fejlkodelæseren fungerer ved hjælp af Scantool softwaren som er en gratis software (medfølger også på CD) derudover understøttes en lang række andre software (Scantool.net, GM Mode, 22 Scan Tool, OBD Gauge for PalmOS and Pocket PC, OBD Logger, OBD-II ScanMaster, obd2crazy.com, OBD2 Scantool,OBDII for ELM322, SpyOBD, RDDTC, Real Scan, ScanTest for Pocket PC, OBD)
Elm 327 fungerer til alle biler som understøtter OBDII samt E-OBD / JOBD protokollerne. Dvs. for Danmarks vedkommende alle benzin biler fra 2001 og frem og alle diesel biler fra 2003 og frem. Da bilindustrien har lagt sig op af CAN bus systemet vil denne fejlkod læser også kunne fungerer langt ind i fremtiden. Med Elm 327 kan man udlæse og slette fejlkoder, og se live diagnostik data. Følgende data er tilgængelige + mange flere: Engine RPM, Calculated Load Value, Coolant Temperature, Fuel System Status, Vehicle Speed, Short Term Fuel Trim, Long Term Fuel Trim, Intake Manifold Pressure, Timing Advance, Intake Air Temperature, Air Flow Rate, Absolute Throttle PositionOxygen sensor voltages/associated short term fuel trims, Fuel System status samt Fuel Pressure .
Visse biler vil allerede fungerer med ELM 327 fra og med 1996 da OBDII standarten allerede da blev indført i USA dette år, først senere her i Europa.
Med ELM 327 får man et rigtig godt multi værktøj som kan bruges til alle nye personbiler. Til en fornuftig pris.
Nu inclusive OBDwiz software og licens Gratis OBS Dette kabel kan benyttes sammen med FiatEcuScan (også for alfa Romeo)
Chip version 1.3 (27.04.2010)
Features: ELM327 USB is the latest PC-based scan tool. It supports all OBD-II protocols and is dispatched with a number of compatible programs. The processor is an ELM327 USB. The output protocol (connection to laptop) is USB. Processor: ELM327 USB
Output protocol: RS232 Baud rate: 9600 or 38400 Indicator LEDs: OBD Tx/Rx, RS232 Tx/Rx, Power Operating voltage: 12V, internal protection from short circuits/overvoltages Nominal idle current: 45 mA
Description: OBD-II Software for ELM327 USB is a free program that allows you to use your PC and a hardware interface to get the information from your car's computer.
The program is very user-friendly, and easy to learn. It is also very easy to install: simply extract the files into a folder on your computer's hard drive, and you're ready to go. To uninstall the program, simply delete the entire contents of the folder where the program resides.
The software supports two platforms - DOS and Windows.
The program lets you perform the following operations: • Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). • Clear trouble codes and turn off the MIL ("Check Engine" light) • Display current sensor data, including: • Engine RPM • Calculated Load Value • Coolant Temperature • Fuel System Status • Vehicle Speed • Short Term Fuel Trim • Long Term Fuel Trim • Intake Manifold Pressure • Timing Advance • Intake Air Temperature • Air Flow Rate • Absolute Throttle Position • Oxygen sensor voltages/associated short term fuel trims • Fuel System status • Fuel Pressure • Many others...
Upcoming Features: • Data graphing and logging • Freeze Frame data • Continuous and Non-Continuous Oxygen Sensor test results
Free software: Scantool.net • GM Mode 22 Scan Tool by Terry • OBD Gauge for PalmOS and Pocket PC by Dana Peters • OBD Logger by Jonathan Senkerik • OBD-II ScanMaster by Wladimir Gurskij (ScanMaster 3.52 - local copy) • obd2crazy.com • OBD2 Scantool by Ivan Andrewjeski • OBDII for ELM322 by David Huffman • pyOBD by Donour Sizemore for MacOSX and Linux • RDDTC by Pete Calinski • Real Scan by Brent Harris • ScanTest for Pocket PC by Ivan Ganev
